Axiom too Manual – Shop Floor CMM
The Axiom too range of manual CMMs are an inexpensive solution for one off inspection. The high quality shop floor design features Aberlink’s easy-to-use software and the unique option to upgrade to full CNC at any time.
Accurate and reliable, the Axiom too Manual CMM comes in Y axis travel sizes of 600mm or 900mm and is supplied as a complete package with everything you need to start measuring parts from day one. The Axiom too can be used with touch trigger probe or with Aberlink’s revolutionary non-contact camera system.
The all aluminium bridge structure ensures the temperature of the machine rapidly follows the temperature of the room, ideal when the CMM is not housed in a controlled environment. Temperature compensation in the software reports results as if they had been measured at 20°C/68°F
Key Features
- Aberlink’s revolutionary easy-to-use measurement software
- Shortest learning curve of any equivalent system – 1 day without prior CMM experience
- Smallest overall footprint of any comparable size CMM
- Individual locks and fine adjust hand wheels on each axis
- Suitable for the workshop environment
- Protection from environmental vibrations as standard
- Optimised friction free air bearings, all aluminium bridge and granite table
- Affordable CNC upgrade option
Standard Package
- Aberlink 3D measurement software for touch probe feature inspection
- Windows based controller, machine controller card and peripherals
- Steel CMM workbench with fixed keyboard shelf or monitor arm
- Renishaw TP8 manual indexing probe head and integrated probe
- Aberlink probe stylus kit
- Aberlink Ø19mm sphere CMM requalification kit
- User training course – up to 4 trainees and software user guide
- 12 months full parts and labour warranty
- Free-of-charge telephone helpdesk support
Technical Information
| Axis Travel (mm) | X 640 Y 600, 900 Z 500 |
| Overall Size (mm) | X 1130 Y 900, 1200 Z 2320 |
| *Volumetric Accuracy | TP20 (2.4 + 0.4L/100) µm |
| Scale Resolution | 0.5µm |
| **Optimum Temp Range | 18 – 22°C |
| Operational Temp Range | 0 – 45°C |
| Table | Honeycomb aluminium & granite or solid granite |
| Table Load Capacity | 300kg (Honeycomb) or 500kg (Solid) |
| Air Consumption | 50 l/min (1.8 cfm) |
| Required Air Pressure | 4 bar (60 psi) |
*Maximum Permissible Error MPEE according to 10360-2, 2009 within the thermal limits defined for optimum temperature range.
**Installation environmental thermal limits: Rate of change <1°C/hr and <2°C/24hr. Temperature gradient <1°C/m
Axiom too CNC – Shop Floor CMM
The Axiom too range of affordable high-performance CNC CMMs are ideal for volume production. The high quality shop floor design features Aberlink’s easy-to-use software plus the flexibility of touch probe and non-contact inspection using the optional Aberlink CMM camera.
Fast, accurate and reliable, the Axiom too CNC CMM comes in four different sizes with Y axis travel up to 1500mm. The Axiom too can be used with touch trigger probe, continuous contact scanning probe or with Aberlink’s revolutionary non-contact camera system.
The all aluminium bridge structure not only ensures that the Axiom too has low inertia and high acceleration to get the job done quickly, but also that the temperature of the machine rapidly follows the temperature of the room, ideal when the CMM is not housed in a controlled environment. Temperature compensation in the software reports results as if they had been measured at 20°C/68°F
The standard high-tech granite and aluminium table, originally developed for the optics industry, provides fantastic natural damping of high frequency vibration and the granite Y rail allows pre-loading of the bridge air bearings in both directions for superior accuracy.
Key Features
- Aberlink’s revolutionary easy-to-use measurement software
- Shortest learning curve of any equivalent system – 1 day without prior CMM experience
- Smallest overall footprint of any comparable size CMM
- Choice of Y axis sizes ranging from 600mm to 1500mm
- Suitable for the workshop environment
- Protection from environmental vibrations as standard
- Optimised friction free air bearings, all aluminium bridge and granite table
- Free stylus change rack with every motorised probe head upgrade
Standard Package
- Aberlink 3D measurement software for touch probe feature inspection
- Windows based controller, machine controller card and peripherals
- Steel CMM workbench with fixed keyboard shelf or monitor arm
- Touch sensitive 3D joystick and variable CMM speed control
- Renishaw TP8 manual indexing probe head and integrated probe
- Aberlink probe stylus kit
- Aberlink Ø19mm sphere CMM requalification kit
- User training course – up to 4 trainees and software user guide
- 12 months full parts and labour warranty
- Free-of-charge telephone helpdesk support
Technical Information
| Axis Travel (mm) | X 640 Y 600, 900, 1200, 1500 Z 500 |
| Overall Size (mm) | X 1130 Y 900, 1200, 1500, 1800 Z 2320 |
| *Volumetric Accuracy | TP20 (2.4 + 0.4L/100) µm TP200 (2.3 + 0.4L/100) µm SP25M (2.1 + 0.4L/100) µm |
| Scale Resolution | 0.5µm |
| **Optimum Temp Range | 18 – 22°C |
| Operational Temp Range | 0 – 45°C |
| Table | Honeycomb aluminium & granite or solid granite |
| Table Load Capacity | 300kg (Honeycomb) or 500kg (Solid) |
| Max. Velocity Vector | 600mm/sec |
| Max. Acceleration Vector | 600mm/sec² |
| Air Consumption | 50 l/min (1.8 cfm) |
| Required Air Pressure | 4 bar (60 psi) |
*Maximum Permissible Error MPEE according to 10360-2, 2009 within the thermal limits defined for optimum temperature range.
**Installation environmental thermal limits: Rate of change <1°C/hr and <2°C/24hr. Temperature gradient <1°C/m
